Home

Which types of memory do not maintain their contents during a power-off state?

A. NVRAM

B. ROM

C. RAM

D. Flash

You can do it yup
  1. You have this binary value: 11000001. This equates to _____ in decimal.
  2. When backing up your IOS image from flash, which of the following will the copy flash tftp command prompt…
  3. You are in Interface Subconfiguration mode and want to completely return to Privilege EXEC mode. What…
  4. Which of the following is a valid subnet mask value?
  5. Which router-on-a-stick command defines the VLAN for the interface?
  6. What router command saves the active configuration to NVRAM?
  7. Which router command clears all of the static translations in the address translation table?
  8. _________ negotiates the data link and network layer protocols that will traverse a PPP connection.
  9. You are given the following addressing information: 10.0.8.0/22. What type of address is this?
  10. _________ defines how the Frame Relay DTE and DCE interact with each other.
  11. RIP has a hold-down period of ____________ seconds.
  12. IGRP generates an update every ___________ seconds.
  13. Which of the following is stored in ROM? (Choose all correct answers.)
  14. You have ISL trunks in your network and five VLANs configured. How many instances of STP are running?
  15. An OSPF's router ID is based on __________.
  16. Which router command creates a standard named ACL called test?
  17. EIGRP will route for ___________.
  18. Which is not one of the three main functions of a layer-2 device?
  19. There are _________ actions a router can take when there is a match on an ACL statement
  20. A ___________ in a bit position of a wildcard mask means that the same bit position in the condition…
  21. Which command is used to define the local addresses that are statically translated to global addresses?
  22. On the 1900 switch, how do you enter User EXEC mode?
  23. If you wanted a list of parameters for the show command, you would type ________.
  24. 172.16.240.256 is a class __________ address.
  25. OSPF hellos are sent every __________ seconds on a multi-access medium.
  26. Which IGRP command allows unequal-cost load balancing?
  27. You are given a MAC address of 01A2.0482.FE12. What is the OUI value in binary?
  28. Which protocol supports VLSM?
  29. Which router command specifies the ISDN switch the router is connected to?
  30. The _________ is your network equipment, which includes the DCE (e.g., a modem) and the DTE (e.g., a…